San Francisco Commercial Epoxy
Closing a business day in this city is expensive, so we build the schedule around your open hours first and the floor second. Marbleous Creationz installs seamless commercial epoxy for cafes and restaurant back-of-house, Mission and Hayes Valley retail, gallery and studio floors, and small industrial shops in Bayview and Dogpatch.
The Floor Goes In While You Are Closed.
Most of what we do in San Francisco happens between the last check of the night and the first delivery of the morning. A cafe on 24th Street cannot go dark on a Saturday. A gallery with a show hanging cannot lose a weekend. So we scope the job around your calendar: what nights you are closed, when the linen truck comes, and how long the room can sit empty before it costs you real money.
That means honest sequencing instead of optimism. We tell you which zones finish in one night and which need two, before you sign anything. A kitchen with equipment to pull and reset is not the same job as an empty retail bay, and pretending otherwise is how installers leave a half-cured floor and a business that cannot open.
The prep is not negotiable either. We diamond-grind the slab to clean concrete, open the pores so the resin can key into it, patch what the last tenant left behind, and read moisture before anything gets poured. Skipping that is why coatings peel in traffic lanes eighteen months later.
Three Floors, Three Very Different Jobs.
Front of House
Retail floors, tasting rooms, salons, and galleries where the floor is part of what people are looking at. Pigmented resin over a ground slab reads like honed concrete without the chalky dust, and the topcoat takes carts, stroller wheels, and nightly mopping without dulling.
See metallic floors →Kitchens
Restaurant back-of-house, prep rooms, walk-in vestibules, and dish pits. Seamless means no grout lines holding grease and no tile to lift under a hot line. We run a coved base up the wall so the floor-to-wall corner squeegees clean and adds traction where the floor stays wet.
See garage floors →Shops
Maker spaces, print shops, small fabrication, and storage bays in Bayview and Dogpatch. Heavier resin build with a broadcast texture for pallet jacks, rolling racks, and dropped stock, plus striping if you want lanes marked on the deck.
Book a Free Consult →Traffic, Spills, and a Mop Every Night.
No Seams to Scrub
A poured floor has nowhere for grease, produce water, or coffee grounds to hide. That is the whole argument for it in a kitchen. Deck brush, neutral cleaner, squeegee to the drain, done.
Grip Where It Gets Wet
We broadcast aggregate into the topcoat at whatever level the room needs. A dish pit gets aggressive texture. A retail entry gets just enough tooth that a rainy Tuesday is not a hazard.
Rolling and Point Loads
Pallet jack wheels and reach-in feet concentrate weight into a tiny footprint. Thin coatings bruise and lift under that. We build thickness where the traffic actually is.
Old Slabs, Damp Ground
Plenty of city buildings sit on slabs poured before vapor barriers were standard. We test first, and if the reading comes back high we mitigate instead of hoping.
Degreaser and Sanitizer
Commercial cleaners are harsher than anything a home floor sees, and they get used nightly. The resin is non-porous, so sanitizer, fryer oil, ink, and wine wipe off instead of soaking in.
Open in the Morning
Fast-cure polyaspartic topcoats let a room go back into service in hours rather than days. That is the difference between one dark night and a lost week of covers.
Your Calendar. Then the Floor.
Walk the Space
We look at the room, the slab, and the door you expect us to carry a grinder through. We map traffic, find the drains, check what the last floor was, and talk through your closed hours. Freight elevator size and alley access change the plan, so we ask up front instead of discovering it at midnight.
Logistics and Permits
Parking here is a real line item. If the block needs a temporary no-parking span so we can unload without blocking a lane, we pull it. Materials come in one drop, coordinated with your building manager, and the neighbors know a machine will run before we start it.
Grind, Patch, Contain
Openings get tented in poly with negative air, and the grinder runs wet or under HEPA extraction. We take the slab to clean concrete, cut and fill cracks, repair the craters old anchors and tile mastic leave, and read moisture before the first coat.
Coat, Cure, Hand It Back
Base coat, color or broadcast layer, then the topcoat with whatever traction the room calls for. We reset what we moved, wipe down what the dust reached, and walk your team through the first week of care. You open on schedule.
From Storefronts to Back Alleys
The work looks different block to block. A Hayes Valley boutique wants the concrete look without a floor that powders onto merchandise. A Mission cafe wants something a health inspector nods at and a closer can clean in ten minutes. A Dogpatch fabrication shop wants a deck that shrugs off a dropped bar of steel.
Older buildings bring their own quirks: slabs patched by four different tenants, floors sloping toward a drain that no longer exists, tile mastic from a 1970s remodel still glued down under the vinyl. We grind through it and tell you what we find rather than coating over a problem. See finished floors in our gallery.
For the look side rather than the workhorse side, our metallic epoxy floors page covers poured art finishes, and our garage epoxy page covers small bay work. Everything we install here is on the San Francisco service page.
Why Not Tile, Sealer, or Bare Slab
Quarry tile is the traditional kitchen answer and it works until the grout gives up. Then you are scrubbing lines that hold grease, and one cracked tile becomes a repair that shuts down the line. A sealer on bare concrete disappears from the traffic lane within a season. Bare slab powders, drinks oil, and looks worse every month you keep it.
A resin floor solves all of that at once because there is nothing for anything to get into. It bonds to the slab, it has no joints, and it cleans with what your closer already owns. It is not the cheapest first number on the page. It is the one that does not become a second project two winters from now.
Maintenance is light but not zero. Neutral cleaner, felt or hard casters under the heavy things, no wire brushes, and a refresh coat around the eight-to-ten-year mark on a punishing floor. We would rather say that now than have you read it later.
Questions We Get Every Week
Can you coat our floor without closing for a week?
Is a seamless floor easier to pass a health inspection with?
Will grinding fill our shop with dust?
Can you match the polished concrete look without the dust problem?
How do you handle parking and freight in the city?
What does the floor need from us afterward?
Where We Work in the City
We take commercial floors across San Francisco, from Mission and Hayes Valley storefronts to Bayview and Dogpatch shops, SoMa studios, and Sunset neighborhood kitchens. Tell us your closed nights and your loading situation and we will tell you honestly what fits in that window. Start on the contact page or call.
Tell Us Your Dark Nights.
We will walk the space, read the slab, and give you a schedule that puts your doors back open on time. Free look at your floor, no obligation.